banner



Home  ›  Gigabyte Ga H270 Gaming 3 Motherboard

Gigabyte Ga H270 Gaming 3 Motherboard

Written By Saturday, October 1, 2022 Add Comment Edit
Skip to content

Gigabyte GA-H270-Gaming 3

Description

    1. Back up for 7thursday and half-dozenth generation Intel® Core™ i7 processors/ Intel® Core™ i5 processors/Intel® Core™ i3 processors/ Intel® Pentium® processors/Intel® Celeron® processors in the LGA1151 package
    2. L3 cache varies with CPU

    (Delight refer "CPU Support List" for more information.)

    1. Intel® H270 Express Chipset
    1. 4 10 DDR4 DIMM sockets supporting up to 64 GB of system memory
      * Due to a Windows 32-fleck operating system limitation, when more than 4 GB of physical memory is installed, the actual retentivity size displayed will be less than the size of the physical retentivity installed.
    2. Dual aqueduct memory architecture
    3. Support for DDR4 2400* / 2133 MHz retentiveness modules
      * To back up 2400 MHz or XMP memory, you must install a viithursday generation processor.
    4. Back up for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in not-ECC mode)
    5. Back up for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 retentivity modules
    6. Back up for Farthermost Retention Contour (XMP) retentivity modules
      * To support 2400 MHz or XMP retentiveness, yous must install a 7thursday generation processor.

    (Please refer "Memory Support List" for more data.)

  • Integrated Graphics Processor-Intel® HD Graphics support:
    1. 1 ten HDMI port, supporting a maximum resolution of 4096×2160@24 Hz
      * Support for HDMI 1.4 version.
    2. 1 ten DVI-D port, supporting a maximum resolution of 1920×1200@sixty Hz
      * The DVI-D port does not back up D-Sub connection past adapter.

    Maximum shared memory of 1 GB

    1. Realtek® ALC1220 codec
    2. Support for Sound Equalizer 10-Fi MB5
    3. High Definition Audio
    4. 2/4/v.1/vii.1-aqueduct
    5. Support for S/PDIF Out
    1. 1 x Killer™ E2500 LAN fleck (ten/100/1000 Mbit)
    1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
      * For optimum performance, if simply one PCI Limited graphics carte du jour is to be installed, be sure to install information technology in the PCIEX16 slot.
    2. ane x PCI Express x16 slot, running at x4 (PCIEX4)
      * The PCIEX4 slot shares bandwidth with the PCIEX1_1 and PCIEX1_2 slots. The PCIEX4 slot operates at up to x1 mode when the PCIEX1_1 or PCIEX1_2 slot is populated.
    3. ii x PCI Express x1 slots
      (All of the PCI Express slots conform to PCI Express 3.0 standard.)
    4. 2 10 PCI slots
  • Chipset:
    1. 1 x M.2 connector (Socket 3, G fundamental, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support)(M2A1_32G)
    2. ane 10 Grand.2 connector (Socket iii, M central, type 2242/2260/2280 PCIe x4/x2 SSD support)(M2A2_32G)
    3. 2 x SATA Express connectors
    4. 6 x SATA 6Gb/s connectors
    5. Support for RAID 0, RAID 1, RAID 5, and RAID x
      * Refer to "1-7 Internal Connectors," for the installation notices for the M.two and SATA connectors.
  • Multi-Graphics Engineering
    1. Back up for AMD Quad-GPU CrossFireX™ and 2-Way AMD CrossFire™ technologies
  • Chipset+ASMedia® ASM2142 USB 3.1 Gen two Controller:
    1. 1 x USB Type-C™ port on the back panel, with USB 3.1 Gen 2 support
    2. one ten USB 3.i Gen 2 Type-A port (red) on the back console

    Chipset:

    1. 8 x USB 3.1 Gen 1 ports (iv ports on the back console, 4 ports available through the internal USB headers)
    2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports bachelor through the internal USB headers)
    1. 1 x 24-pin ATX main power connector
    2. 1 x 8-pin ATX 12V power connector
    3. two x Thousand.2 Socket three connectors
    4. 2 x SATA Express connectors
    5. 6 x SATA 6Gb/s connectors
    6. 1 x CPU fan header
    7. 1 x water cooling CPU fan header
    8. 2 x system fan headers
    9. one x system fan/h2o cooling pump header
    10. 1 ten front console header
    11. i x front end console audio header
    12. ii x USB three.1 Gen i headers
    13. 2 x USB 2.0/1.1 headers
    14. one 10 RGB (RGBW) LED strip extension cable header
    15. 1 x S/PDIF Out header
    16. i 10 serial port header
    17. 1 x Trusted Platform Module (TPM) header
    18. 1 10 Thunderbolt™add-in card connector
    19. 1 x Articulate CMOS jumper
    1. one 10 PS/2 keyboard/mouse port
    2. 1 x USB Blazon-C™ port, with USB 3.1 Gen 2 support
    3. 1 10 USB three.one Gen ii Type-A port (carmine)
    4. 1 10 DVI-D port
    5. one x HDMI port
    6. 4 x USB 3.1 Gen ane ports
    7. two x USB 2.0/1.1 ports
    8. 1 x RJ-45 port
    9. half-dozen x sound jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In)
    1. iTE® I/O Controller Fleck
    1. Voltage detection
    2. Temperature detection
    3. Fan speed detection
    4. Overheating warning
    5. Fan fail warning
    6. Fan speed command
      * Whether the fan (pump) speed control function is supported will depend on the fan (pump) yous install.
    1. 2 x 64 Mbit wink
    2. Use of licensed AMI UEFI BIOS
    3. Support for DualBIOS™
    4. PnP 1.0a, DMI 2.7, WfM two.0, SM BIOS 2.seven, ACPI five.0
    1. Back up for APP Center
      * Available applications in APP Centre may vary by motherboard model. Supported functions of each application may too vary depending on motherboard specifications.
      3D OSD
      @BIOS
      AutoGreen
      BIOS Setup
      Color Temperature
      Deject Station
      EasyTune
      Easy RAID
      Fast Kicking
      Game Heave
      ON/OFF Accuse
      Platform Power Direction
      RGB Fusion
      Smart Backup
      Smart Keyboard
      Smart TimeLock
      Arrangement Information Viewer
      USB Blocker
      USB DAC-Upward two
      V-Tuner
    2. Support for 3TB+ Unlock
    3. Support for Q-Flash
    4. Support for Xpress Install
    1. Norton® Internet Security (OEM version)
    2. Intel® Optane™ Memory Fix
    1. Windows® 10 64-bit (for 7th Generation Intel® Processors)
    2. Windows® 10 64-bit / Windows® 8.1 64-flake / Windows® 7 32-bit / 64-bits (for 6th Generation Intel® Processors)
      * Please download the "Windows USB Installation Tool" from GIGABYTE'south website and install information technology earlier installing Windows 7.
    1. ATX Form Factor; 30.5cm 10 24.4cm
    1. GA-H270-Gaming 3 motherboard
    2. Two SATA cables
    3. Motherboard driver deejay
    4. I/O Shield
    5. User'due south Manual
    6. One K Connector
    1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or third political party website.
    2. Nearly hardware/software vendors may no longer offer drivers to back up Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.

Boosted data

Weight 3 kg

Reviews

There are no reviews yet.

Title

Page load link

Gigabyte Ga H270 Gaming 3 Motherboard,

Source: https://tonixcomputer.co.id/product/gigabyte-ga-h270-gaming-3/

Posted by: morsewilet1939.blogspot.com

0 Response to "Gigabyte Ga H270 Gaming 3 Motherboard"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel